Recording Screen - Manual Mode; Figure G-10: Recording Screen - Manual Mode - AudioCodes Mediant 1000 User Manual

SIP User's Manual
G.2.5 Recording Screen – Manual Mode
In manual mode you can record and analyze tones, included in the Call Progress Tones ini
file, in addition to those tones analyzed when in automatic mode.
To start recording in manual mode, take these 6 steps:
1. Click the Manual tab at the top of the recording screen, the manual recording screen
is displayed.
2. Check the play-through check box to hear the tones through your PC speakers.
3. Click the Go offhook button, enter a number to dial in the Dial field, and click the Dial
button. When you're ready to record, click the Start Recording button; when the
desired tone is complete, click Stop Recording. (The recorded tone is saved as
'cpt_manual_tone.pcm'.)
Note:
4. Select the tone type from the drop-down list and click Analyze recorded tone; the
analyzed tone is added to the Tones analyzed list at the bottom of the screen. It is
possible to record and analyze several different tones for the same tone type (e.g.,
different types of 'busy' signal).
5. Repeat the process for more tones, as necessary.
6. When you're finished adding tones to the list, click Next to generate a Call Progress
Tones ini file and terminate the wizard.
Version 5.0

Figure G-10: Recording Screen - Manual Mode

Due to some PC audio hardware limitations, you may hear 'clicks' in play-
through mode. It is safe to ignore these clicks.
G. Accessory Programs and Tools
439 December 2006