Syslog Servers; Operation - AudioCodes Mediant 1000 User Manual

SIP User's Manual

15.3.1 Syslog Servers

Users can use the provided Syslog server (ACSyslog) or other third-party Syslog servers.
Examples of Syslog servers available as shareware on the Internet:
Kiwi Enterprises:
The US CMS Server:
TriAction Software:
Netal SL4NT 2.1 Syslog Daemon:
A typical Syslog server application enables filtering of the messages according to priority,
IP sender address, time, date, etc.

15.3.2 Operation

The Syslog client, embedded in the Mediant 1000, sends error reports/events generated by
the Mediant 1000 unit application to a Syslog server, using IP/UDP protocol.
To activate the Syslog client on the Mediant 1000, take these 5
steps:
1. Set the parameter 'EnableSyslog' to 1 (refer to
2. Use the parameter 'SyslogServerIP' to define the IP address of the Syslog server you
use (refer to
3. Use the parameter 'SyslogServerPort' to define the port number of the Syslog server
(refer to
4. To determine the Syslog logging level use the parameter 'GWDebugLevel' (refer to
Table 5-7
5. To enable the gateway to send log messages that report certain types of Web actions
according to a pre-defined filter use the parameter 'ActivityListToLog' (described in
Table 5-37
Version 5.0
http://www.kiwisyslog.com/
http://uscms.fnal.gov/hanlon/uscms_server/
http://www.triaction.nl/Products/SyslogDaemon.asp
Table 5-37 on page 179).
Table 5-37 on page 179).
on page 85).
on page 179).
http://www.netal.com/
Table 5-37
367
15. Diagnostics
on page 179).
December 2006