Figure 5-50: Web User Accounts Screen (For Users With 'Security Administrator' Privileges) - AudioCodes Mediant 1000 User Manual

SIP User's Manual
To change the Web User Accounts attributes, take these 4 steps:
1. Open the 'Web User Accounts' screen (Advanced Configuration menu > Security
Settings > Web User Accounts option); the 'Web User Accounts' screen is
displayed.

Figure 5-50: Web User Accounts Screen (for Users with 'Security Administrator' Privileges)

2. To change the access level of the secondary account (the access level of the primary
account cannot be changed), from the 'Access Level' drop-down list, select the new
access level, and then click the button Change Access Level; the new access level is
applied immediately.
3. To change the username of an account, enter the new username in the field 'User
Name', and then click the button Change User Name; the new username is applied
immediately and the 'Enter Network Password' screen appears (shown in
on page 57). Enter the updated username in the 'Enter Network Password' screen.
Note that the username can be a maximum of 19 case-sensitive characters.
4. To change the password of an account, enter the current password in the field
'Current Password', the new password in the fields 'New Password' and 'Confirm New
Password', and then click the button Change Password; the new password is applied
immediately and the 'Enter Network Password' screen appears (shown in
on page 57). Enter the updated password in the 'Enter Network Password' screen.
Note that the password can be a maximum of 19 case-sensitive characters.
Note:
Version 5.0
A user with a 'Security Administrator' access level can change all attributes
for all accounts. Users with an access level other than 'Security
Administrator' can only change their own password and username.
171
5. Web Management
Figure 5-1
Figure 5-1
December 2006