Configuring The Vlan Settings; Figure 5-40: Vlan Settings Screen - AudioCodes Mediant 1000 User Manual

SIP User's Manual
Column Name
[ini File Parameter Name]
Network Type
[RoutingTableInterfacesColumn]
5.6.1.5

Configuring the VLAN Settings

For detailed information on the Mediant 1000 VLAN implementation, refer to Section
on page 308.
To configure the VLAN Settings parameters, take these 4 steps:
1. Open the 'VLAN Settings' screen (Advanced Configuration menu > Network
Settings > VLAN Settings option); the 'VLAN Settings' screen is displayed.
2. Configure the VLAN Settings according to
3. Click the Submit button to save your changes.
4. To save the changes so they are available after a power fail, refer to Section
page 200.
Version 5.0
Table 5-26: IP Routing Table Column Description
Description
Specifies the network type the routing rule is applied to.
OAM [0] (default).
Control [1].
Media [2].
For detailed information on the network types, refer to Section
page 308.

Figure 5-40: VLAN Settings Screen

Table 5-27.
147
5. Web Management
10.9 on
10.9
5.9.2 on
December 2006