5.6.2.3
Configuring the RTP / RTCP Settings
To configure the RTP / RTCP Settings parameters, take these 4
steps:
1.
Open the 'RTP / RTCP Settings' screen (Advanced Configuration menu > Media
Settings > RTP / RTCP Settings option); the 'RTP / RTCP Settings' screen is
displayed.
2.
Configure the RTP / RTCP Settings according to
3.
Click the Submit button to save your changes.
4.
To save the changes so they are available after a power fail, refer to Section
page 200.
SIP User's Manual
Figure 5-43: RTP / RTCP Settings Screen
154
Table
5-30.
Document #: LTRT-83301
Mediant 1000
5.9.2
on