Figure 14-3: Ike Table Screen - AudioCodes Mediant 1000 User Manual

SIP User's Manual
To configure the IKE table using the Embedded Web Server, take
these 6 steps:
1. Access the Embedded Web Server (refer to Section
2. Open the 'IKE Table' screen (Advanced Configuration menu > Security Settings >
IKE Table option); the 'IKE Table' screen is displayed.
3. In the 'Policy Index' drop-down list, select the peer you want to edit (up to 20 peers
can be configured).
4. Configure the IKE parameters according to
5. Click the button Create; a row is create in the IKE table
6. To save the changes so they are available after a power fail, refer to Section
page 200.
To delete a peer from the IKE table, select it in the 'Policy Index' drop-down list, click the
button Delete and click OK in the prompt.
Version 5.0

Figure 14-3: IKE Table Screen

347
5.3 on page 57).
Table 14-1 on page 345.
14. Security
5.9.2 on
December 2006