Pstn-To-Sip Interworking; Supported Interworking Features - AudioCodes Mediant 1000 User Manual

Sip media gateways
Hide thumbs Also See for Mediant 1000:
Table of Contents

Advertisement

SIP User's Manual
Secured Web access (HTTPS) and Telnet access using SSL / TLS.
IPSec and IKE protocols are used in conjunction to provide security for control (e.g.,
SIP) and management (e.g., SNMP and Web) protocols.
1.2.2

PSTN-to-SIP Interworking

The Mediant 1000 Digital SIP gateway supports various ISDN PRI protocols such as
EuroISDN, North American NI2, Lucent 4/5ESS, Nortel DMS100, Meridian1 DMS100,
Japan J1, as well as QSIG. PRI support includes User Termination or Network Termination
side. ISDN-PRI protocols can be defined on an E1/T1 basis (i.e., different variants of PRI
are allowed on different E1/T1 spans).
In addition, the gateway supports numerous variants of CAS protocols for E1 and T1
spans, including MFCR2, E&M wink start, E&M immediate start, E&M delay dial/start, loop-
start, and ground start. CAS protocols can be defined on an E1/T1 basis (i.e., different
variants of CAS are allowed on different E1/T1 spans).
The gateway simultaneously supports different variants of CAS and PRI protocols on
different E1/T1 spans (no more than four simultaneous PRI variants).
PSTN to SIP and SIP to PSTN Called and Calling numbers can be optionally modified
according to rules that are defined in gateway's ini file.
1.2.3

Supported Interworking Features

Definition and use of Trunk Groups for routing IP-to-PSTN calls.
B-channel negotiation for PRI spans.
ISDN Non Facility Associated Signaling (NFAS).
PRI to SIP interworking according to <draft-ietf-sipping-qsig2sip-04.txt>.
PRI to SIP Interworking of Q.931 Display (Calling name) information element.
PRI (NI-2, 5ESS) to SIP interworking of Calling Name using Facility IE in Setup and
Facility messages.
Configuration of Numbering Plan and Type for IP-to-ISDN calls.
Interworking and flexible mapping of PSTN to SIP release causes.
Interworking of ISDN redirect number to SIP diversion header (according to IETF
<draft-levy-sip-diversion-05.txt>).
Optional change of redirect number to called number for ISDN-to-IP calls.
Interworking of ISDN calling line Presentation & Screening indicators using RPID
header <draft-ietf-sip-privacy-04.txt>.
Interworking of Q.931 Called and Calling Number Type and Number Plan values using
the RPID header.
Interworking of Calling and Called Subaddress values for SIP-to-ISDN calls.
Supports ISDN en-block or overlap dialing for incoming Tel-to-IP calls.
Supports a digit map pattern to reduce the dialing period when Overlap dialing is used.
Supports routing of IP-to-Tel calls to predefined trunk groups.
Supports a configurable channel select mode per trunk group.
Supports various number manipulation rules for IP-to-Tel and Tel-to-IP, called and
calling numbers.
Option to configure ISDN Transfer Capability per trunk.
Supports transfer of User-to-User Information Element (UUIE) between SIP and PRI.
Supports ISDN Transfer using TBCT / RLT / ECT.
Supports QSIG messages tunneling over SIP according to <draft-elwell-sipping-qsig-
tunnel-03>.
Version 5.0
25
1. Overview
December 2006

Advertisement

Table of Contents
loading

Table of Contents