Replacing The Main Corporate Logo With A Text String; Replacing The Background Image File; Table 12-4: Web Appearance Customizable Ini File Parameters - AudioCodes Mediant 1000 User Manual

SIP User's Manual

12.6.1.2 Replacing the Main Corporate Logo with a Text String

The main corporate logo can be replaced with a text string.
To replace AudioCodes' default logo with a text string via the Web Interface, modify
the two ini file parameters in
Section
To replace AudioCodes' default logo with a text string via the ini file, add/modify the
two ini file parameters in
6.2 on page 213.

Table 12-4: Web Appearance Customizable ini File Parameters

Parameter
UseWebLogo
WebLogoText

12.6.2 Replacing the Background Image File

The background image file is duplicated across the width of the screen. The number of
times the image is duplicated depends on the width of the background image and screen
resolution. When choosing your background image, keep this in mind.
Note:
To replace the background image via the Web, take these 6 steps:
1. Access the Mediant 1000 Embedded Web Server (refer to Section
2. In the URL field, append the suffix 'AdminPage' (note that it's case-sensitive) to the IP
address, e.g., http://10.1.229.17/AdminPage.
3. Click the Image Load to Device; the Image load screen is displayed (shown in
12-7).
4. Click the Browse button in the 'Send Background Image File from your computer to
gateway' box. Navigate to the folder that contains the background image file you want
to load.
5. Click the Send File button; the file is sent to the device. When loading is complete, the
screen is automatically refreshed and the new background image is displayed.
6. To save the image to flash memory so it is available after a power fail, refer to Section
5.9.2 on page 200.
The new background appears on all Web Interface screens.
Tip 1:
Tip 2:
Version 5.0
Table 12-4
12.6.4 on page 332.
Table 12-4
Description
0 = Logo image is used (default).
1 = Text string is used instead of a logo image.
Text string that replaces the logo image.
The string can be up to 15 characters.
Use a gif, jpg or jpeg file for the background image. It is important that the
image file has a fixed height of 59 pixels. The size of the image files (logo
and background) is limited each to 64 kbytes.
If you encounter any problem during the loading of the files, or you want to
restore the default images, click the Restore Default Images button.
When replacing both the background image and the logo image, first load
the logo image followed by the background image.
12. Advanced System Capabilities
according to the procedure described in
according to the procedure described in Section
331
5.3 on page 57).
Figure
December 2006