Configuring The Voice Settings; Figure 5-41: Voice Settings Screen; Table 5-28: Media Settings, Voice Settings Parameters - AudioCodes Mediant 1000 User Manual

SIP User's Manual
5.6.2.1

Configuring the Voice Settings

To configure the Voice Settings parameters, take these 4 steps:
1. Open the 'Voice Settings' screen (Advanced Configuration menu > Media Settings
> Voice Settings option); the 'Voice Settings' screen is displayed.
2. Configure the Voice Settings according to
3. Click the Submit button to save your changes.
4. To save the changes so they are available after a power fail, refer to Section
page 200.
Parameter
Voice Volume
[VoiceVolume]
Input Gain
[InputGain]
Version 5.0

Figure 5-41: Voice Settings Screen

Table 5-28: Media Settings, Voice Settings Parameters

Description
Voice gain control in dB. This parameter sets the level for the transmitted
(IP PSTN/Tel) signal.
The valid range is -32 to 31 dB.
The default value is 0 dB.
PCM input gain control in dB. This parameter sets the level for the received
(Tel/PSTN IP) signal.
The valid range is -32 to 31 dB.
The default value is 0 dB.
Note: This parameter is intended for advanced users. Changing it affects
other gateway functionalities.
Table 5-28.
149
5. Web Management
5.9.2 on
December 2006