Component: Alarmmanager#0; Component: Chassis#0; I.1.2 Component: Alarmmanager#0 - AudioCodes Mediant 1000 User Manual

I.1.2

Component: AlarmManager#0

The source varbind text for all the alarms under this component is Board#<n>/AlarmManager#0 where
n is the slot number.
Table I-11: acActiveAlarmTableOverflow Alarm Trap
Alarm:
OID:
Default Severity:
Event Type:
Probable Cause:
Alarm Text:
Status Changes:
Condition:
Alarm status:
Condition:
Alarm status:
Note:
Corrective Action:
I.1.3

Component: Chassis#0

The source varbind text for the alarm under the component below is Chassis#0/FanTray#0.
Alarm:
OID:
Default Severity:
Event Type:
Probable Cause:
Alarm Text:
Status Changes:
Condition:
Alarm status:
<text value>:
Condition:
Alarm status:
<text value>:
Condition:
Alarm status:
SIP User's Manual
acActiveAlarmTableOverflow
1.3.6.1.4.15003.9.10.1.21.2.0.12
Major
processingErrorAlarm
resourceAtOrNearingCapacity (43)
Active alarm table overflow
Too many alarms to fit in the active alarm table
Major
After raise
Status stays major until reboot. A clear trap is not sent.
The status stays major until reboot as it denotes a possible loss of information
until the next reboot. If an alarm is raised when the table is full, it is possible that
the alarm is active, but does not appear in the active alarm table.
Some alarm information may have been lost, but the ability of the device to
perform its basic operations has not been impacted. A reboot is the only way to
completely clear a problem with the active alarm table. Contact your first-level
group.
Table I-12: acFanTrayAlarm Alarm Trap
acFanTrayAlarm
1.3.6.1.4.1.5003.9.10.1.21.2.0.29
Critical
equipmentAlarm
heatingVentCoolingSystemProblem
Fan-Tray Alarm.
Fan-Tray is missing
Critical
Fan-Tray Alarm. Fan-Tray is missing.
One or more fans in the Fan-Tray are faulty.
Major
Fan tray is in place and fans are working.
Fan is faulty.
Cleared
456
Mediant 1000
Document #: LTRT-83301