Physical Mounting Requirements; Mediant 1000 Front Panel Connection; Mediant 1000 Rear Panel Connection; Software Installation - AudioCodes Mediant 1000 User Manual

L.3

Physical Mounting Requirements

L.3.1

Mediant 1000 Front Panel Connection

To connect to the front panel, take these 3 steps:
1. Connect the RS-232 cable from the PC to the RS-232 port on the Mediant 1000.
2. Connect the USB connection cable from the external CD-ROM to the USB port. Refer
to the figure below.
L.3.2

Mediant 1000 Rear Panel Connection

To connect to the rear panel, take these 3 steps:
1. Connect the Ethernet cable to the ACT Link, on the rear side of the Mediant 1000.
1. Connect the external CD-ROM power supply.
2. Connect the Mediant 1000 power supply.
L.4

Software Installation

The following three sections describe how to install different versions of Linux
TM
Linux
TM
Linux
TM
Linux
L.5 Linux™ RedHat (and Fedora) Installation
Instructions
Perform the following four stages for Linux
distributions of Linux
L.5.1

Stage 1: Obtaining the ISO Image

In order to obtain an updated ISO image, either download it from the AudioCodes website
as described in Section L.5.1.1, or create it using the steps detailed in Section L.5.1.2.
SIP User's Manual
Figure L-1: Mediant 1000 Front Panel Connections
RedHat (and Fedora) Installation
Debian Installation
SUSE Installation
TM
may vary slightly):
TM
Redhat (and Fedora) Installation. (Some
472
Mediant 1000
TM
.
Document #: LTRT-83301