Configuring The Snmp Managers Table; Figure 5-55: Snmp Managers Table Screen - AudioCodes Mediant 1000 User Manual

Table 5-37: Management Settings Parameters (continues on pages 179 to 180)
Parameter
Device Software Update
[ActivityListToLog = SWU]
Access to Restricted Domains
[ActivityListToLog = ARD]
Non-Authorized Access
[ActivityListToLog = NAA]
Sensitive Parameters Value
Change
[ActivityListToLog = SPC]
5.6.8.1

Configuring the SNMP Managers Table

The SNMP Managers table allows you to configure the attributes of up to five SNMP
managers.
To configure the SNMP Managers Table, take these 6 steps:
1. Access the 'Management Settings' screen (Advanced Configuration menu >
Management Settings); the 'Management Settings' screen is displayed
2. Open the 'SNMP Managers Table' screen by clicking the arrow sign (-->) to the right of
the SNMP Managers Table label; the 'SNMP Managers Table' screen is displayed
(Figure
3. Configure the SNMP Managers parameters according to
4. Click the Submit button to save your changes.
5. To save the changes so they are available after a power fail, refer to Section
page 200.
SIP User's Manual
Description
cmp loading via the Software Upgrade Wizard.
Access to Restricted Domains.
The following screens are restricted:
(1) ini parameters (AdminPage)
(2) General Security Settings
(3) Configuration File
(4) IPSec/IKE tables
(5) Software Upgrade Key
(6) Internal Firewall
(7) Web Access List.
(8) Web User Accounts
Attempt to access the Embedded Web Server with a false / empty username
or password.
Changes made to sensitive parameters:
(1) IP Address
(2) Subnet Mask
(3) Default Gateway IP Address
(4) ActivityListToLog
5-55).

Figure 5-55: SNMP Managers Table Screen

180
Mediant 1000
(Figure 5-54).
Table 5-38 on page 181.
5.9.2
Document #: LTRT-83301
on