Viewing Ethernet Port Settings; Assigning A Name Or Brief Description To A Port; Figure 5-81: Ethernet Port Information Screen; Figure 5-82: Entering A Port Name - AudioCodes Mediant 1000 User Manual

SIP User's Manual

5.10.6 Viewing Ethernet Port Settings

The 'Ethernet Port Information' screen provides read-only information on the Ethernet
connection used by the Mediant 1000. The Ethernet Port Information parameters are
displayed in
refer to Section
To view Ethernet port settings, take this step:
In the Home page, click the Ethernet port status icon
Information' screen opens.
Parameter
Active Port
Port 1 Duplex Mode
Port 1 Speed
Port 2 Duplex Mode
Port 2 Speed

5.10.7 Assigning a Name or Brief Description to a Port

The Home page allows you to assign an arbitrary name or brief description to the
gateway's ports. This description appears as a tooltip when you move your mouse over the
specific port.
To add a port description, take these 4 steps:
1. Open the Home page by clicking the Home icon.
2. Click the required module port icon; a shortcut menu appears.
3. From the shortcut menu, choose Update Port Info; a text box appears.
4. Type a brief description for the port, and then click Apply Port Info.
Version 5.0
Table 5-50. For detailed information on the Ethernet interface configuration,
10.1 on page 301.

Figure 5-81: Ethernet Port Information Screen

Table 5-50: Ethernet Port Information Parameters

Description
Shows the active Ethernet port (1 or 2).
Shows the Duplex mode Ethernet port 1 is using (Half Duplex or Full Duplex).
Shows the speed, in Mbps, that Ethernet port 1 is using (10 Mbps or 100
Mbps).
Shows the Duplex mode Ethernet port 2 is using (Half Duplex or Full Duplex).
Shows the speed, in Mbps, that Ethernet port 2 is using (10 Mbps or 100
Mbps).

Figure 5-82: Entering a Port Name

209
5. Web Management
; the 'Ethernet Port
December 2006