AudioCodes Mediant 1000 User Manual page 322

The following example illustrates how to utilize Automatic Updates for deploying devices
with minimum manual configuration.
To utilize Automatic Updates for deploying the Mediant 1000 with
minimum manual configuration, take these 5 steps:
1. Set up a Web server (in the following example it is http://www.corp.com/) where all
configuration files are to be stored.
2. To each device, pre-configure the following parameter (DHCP / DNS are assumed):
IniFileURL = 'http://www.corp.com/master_configuration.ini'
3. Create a file named master_configuration.ini, with the following text:
# Common configuration for all devices
# ------------------------------------
CptFileURL = 'http://www.corp.com/call_progress.dat'
# Check for updates every 60 minutes
AutoUpdateFrequency = 60
# Additional configuration per device
# -----------------------------------
# Each device loads a file named after its MAC address,
# (e.g., config_00908F033512.ini)
IniFileURL = 'http://www.corp.com/config_<MAC>.ini'
# Reset the device after configuration is updated.
# The device resets after all of the files are processed.
ResetNow = 1
You can modify the master_configuration.ini file (or any of the config_<MAC>.ini files)
at any time. The Mediant 1000 queries for the latest version every 60 minutes and
applies the new settings immediately.
4. For additional security, use HTTPS or FTPS. The Mediant 1000 supports HTTPS
(RFC 2818) and FTPS using the AUTH TLS method <draft-murray-auth-ftp-ssl-16> for
the Automatic Update mechanism.
5. To load configuration files from an NFS server, the NFS file system parameters should
be defined in the configuration ini file. The following is an example of an ini file for
loading files from NFS servers using NFS version 2.
# Define NFS servers for Automatic Update
[ NFSServers ]
FORMAT NFSServers_Index = NFSServers_HostOrIP, NFSServers_RootPath,
NFSServers_NfsVersion;
NFSServers 1 = 10.31.2.10, /usr/share, 2 ;
NFSServers 2 = 192.168.100.7, /d/shared, 2 ;
[ \NFSServers ]
CptFileUrl = 'file://10.31.2.10/usr/share/public/usa_tones.dat'
VpFileUrl = 'file://192.168.100.7/d/shared/audiocodes/voiceprompt.dat'
SIP User's Manual 322
Mediant 1000
Document #: LTRT-83301