Configuring The Vlan Settings; Figure 5-41: Vlan Settings Screen - AudioCodes MediaPack MP-11X User Manual

Column Name
[ini File Parameter Name]
Gateway IP Address
[RoutingTableGatewaysColum
n]
TTL
Hop Count
[RoutingTableHopsCountColu
mn]
Network Type
[RoutingTableInterfacesColum
n]
5.6.5

Configuring the VLAN Settings

For detailed information on the gateway VLAN implementation, refer to 'VLANS and
Multiple IPs' on page 372.
To configure the VLAN Settings parameters, take these 4 steps:
Open the 'VLAN Settings' screen (Advanced Configuration menu > Network
1.
Settings > VLAN Settings option).
SIP User's Manual
Table 5-32: IP Routing Table Column Description
Specifies the IP address of the router to which the packets are sent
if their destination matches the rules in the adjacent columns.
A read-only field that indicates the time period for which the specific
routing rule is valid. The lifetime of a static route is infinite.
The maximum number of allowed routers between the gateway and
destination.
Specifies the network type the routing rule is applied to.
[0] OAM (default).
[1] Control.
[2] Media.
For detailed information on the network types, refer to 'Multiple IPs'
on page 372.

Figure 5-41: VLAN Settings Screen

Description
174
MediaPack Series
Document #: LTRT-65409