Matchcode - Microscan QX Hawk User Manual

Matchcode

Matchcode
Click the App Mode button and then the Parameters button to display the
tree control tabs.
Then click the Matchcode tab to display the Matchcode tree control.
To open nested options,
single-click the +.
Note: Matchcode settings can also be sent to the imager from ESP's Terminal using
Microscan's K command format. Refer to the
5-162
To change a setting, double-click
the setting and use the cursor to
scroll through the options.
Matchcode section of
QX Hawk Industrial Imager User's Manual
*
The indicates
that the setting
is the default.
Appendix E.