Microscan QX Hawk User Manual page 267

Firmware/Checksum
Imager Status
Learn
Master Database
Read Rate
Reboot System
Static Validation
Targeting
Temperature
Y-Modem Transfer
Options
QX Hawk Industrial Imager User's Manual
<#b.>
<#d.>
<#k.>
<!>
<!a>
<!d>
<rb,key>
<?>
<K?>
<K??>
<K?#>
<Knnn?>
<Knnn??>
<Knnn?#>
<Knnnd>
<LEARN>
<UNLEARN>
<LEARN?>
<G>
<Gn>
<NEWM>
<C>
<Cp>
<J>
<reboot>
<VAL>
<l1>
<l0>
<@TEMP>
<uy,path and image file
name>
<dy,image file name>
<dy,key>
Display Boot Code Build Number
Display DSP Code Build Number
Display Kernel Code Build Number
Display All Available Firmware Checksums
Display Application Code Code Checksum
Display DSP Code Checksum
Roll Back Application Code
Imager Status Request
All Status Request
All Descriptor Request
All Range Request
Single Status Request
Single Descriptor Request
Single Range Request
Single Command Default
Initiate Learn Operation
Initiate Unlearn Operation
Display Learn Status
Store Next Decoded Symbol to Database Index 1
Store Next Decoded Symbol to Database Index n
New Master Load Status
Enter Decodes/Second Test
Enter Decode Percent Test
Exit Decodes/Second and Decode Percent Tests
Cold Boot System from Boot Code
Perform Static Validation of Data Matrix Symbol
Activate Targeting System
De-activate Targeting System
Display Image Sensor Temperature
Y-Modem Upload
Y-Modem Download (Image)
Y-Modem Download (Code)
Utilities
7-3