Table of Contents
Advertisement
Serial Commands
Source
Serial Cmd:
<K162,mode,source,daisy chain i.d. status,daisy chain i.d.>
Default:
1 = RS-232 on QX Hawk Connector B
Options:
0 = RS-232 on QX Hawk Connector A
1 = RS-232 on QX Hawk Connector B
2 = RS-422 on QX Hawk Connector B
4 = Ethernet TCP Port 1
5 = Ethernet TCP Port 2
Daisy Chain ID Status
Serial Cmd:
<K162,mode,source,daisy chain i.d.
Default:
0 = Disabled
Options:
0 = Disabled
Daisy Chain ID
Serial Cmd:
<K162,mode,source,daisy chain i.d.
Default:
1/
Options:
One or two ASCII characters.
A-30
status,daisy chain i.d.>
1 = Enabled
status,daisy chain
QX Hawk Industrial Imager User's Manual
i.d.>
Advertisement
Table of Contents
Need help?
Do you have a question about the QX Hawk and is the answer not in the manual?
Questions and answers