Table of Contents
Advertisement
Serial Commands
EAN Status
Serial Cmd:
<K473,UPC
separator character,supplemental type,format UPC-E as UPC-A>
Default:
1 = Enabled
Options:
0 = Disabled
Supplementals Status (UPC/EAN)
Serial Cmd:
<K473,UPC status,EAN
separator character,supplemental type,format UPC-E as UPC-A>
Default:
0 = Disabled
Options:
0 = Disabled
Separator Status (UPC/EAN)
Serial Cmd:
<K473,UPC status,EAN status,supplementals
separator character,supplemental type,format UPC-E as UPC-A>
Default:
0 = Disabled
Options:
0 = Disabled
Separator Character (UPC/EAN)
Serial Cmd:
<K473,UPC status,EAN status,supplementals status,separator status,
separator
Default:
, (comma)
Options:
Any 7-bit ASCII character
Supplemental Type (UPC/EAN)
Serial Cmd:
<K473,UPC status,EAN status,supplementals status,separator status,
separator
Default:
0 = Both
Options:
0 = Both
Format UPC-E as UPC-A (UPC/EAN)
Serial Cmd:
<K473,UPC status,EAN status,supplementals status,separator status,
separator character,supplemental
Default:
0 = Disabled
Options:
0 = Disabled
A-40
status,EAN
status,supplementals status,separator status,
1 = Enabled
status,supplementals
1 = Enabled
1 = Enabled
character,supplemental type,format UPC-E as UPC-A>
character,supplemental
1 = 2 characters only
1 = Enabled
status,separator status,
2 = Required
status,separator
type,format UPC-E as UPC-A>
2 = 5 characters only
type,format UPC-E as
QX Hawk Industrial Imager User's Manual
status,
UPC-A>
Advertisement
Table of Contents
Need help?
Do you have a question about the QX Hawk and is the answer not in the manual?
Questions and answers