Microscan QX Hawk User Manual page 356

Serial Commands
Diagnostics
Hours Since Reset (Read-only)
Service Message
User-Defined Name
Hours Since Reset (Read-only)
Hours
Serial Cmd: <K407,hours,minutes>
16-bit counter (0 to 65535)
Minutes
Serial Cmd: <K407,hours,minutes>
16-bit counter (0 to 60)
Service Message
Serial Cmd: <K409,status,service message,threshold,resolution>
Default: 0 = Disabled
Options: 0 = Disabled
Service Message
Serial Cmd: <K409,status,service
Default: SERVICE
Options: Any valid ASCII string up to 128 characters
Threshold
Serial Cmd: <K409,status,service message,threshold,resolution>
Default: 300 (5 minutes)
Options: 1 to 65535
Resolution
Serial Cmd: <K409,status,service message,threshold,resolution>
Default: 0 = Seconds
Options: 0 = Seconds
User-Defined Name
Serial Cmd: <K412,user-defined
Default: QX Hawk
Options: Any valid ASCII string up to 50 characters
A-58
<K407> (returns: hours,minutes)
<K409,status,service message, threshold,resolution>
<K412,user-defined name>
1 = Enabled
message,threshold,resolution>
1 = Minutes
name>
QX Hawk Industrial Imager User's Manual