Table of Contents
Advertisement
Serial Commands
Input 1
Serial Cmd:
<K730,status,active state>
Default:
0 = Disabled
Options:
0 = Disabled
1 = Reset Counts
2 = Unlatch Output
Active State
Serial Cmd:
<K730,status,active
Default:
0 = Active Open
Options:
0 = Active Open
Green Flash LED
Green Flash Mode
Serial Cmd:
<K750,green flash
Default:
1 = Good Read
Options:
0 = Disabled
1 = Good Read
2 = Static Presentation
3 = Match
4 = Mismatch
5 = Strobe
Green Flash Duration
Serial Cmd:
<K750,green flash
Default:
100 (1 second)
Options:
0 to 65535 (in 10 ms increments)
Status Indicators
Serial Cmd:
<K751,status,bar graph,I/O 1,I/O 2>
Default:
1 = PHY Activity
Options:
0 = Disabled
1 = PHY Activity
2 = Protocol Activity
Bar Graph
Serial Cmd:
<K751,status,bar
Default:
1 = Read Rate / Good Read
Options:
0 = Disabled
1 = Read Rate / Good Read
A-50
state>
1 = Active Closed
mode,unused,green flash duration>
mode,unused,green flash
graph,I/O 1,I/O 2>
duration>
QX Hawk Industrial Imager User's Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the QX Hawk and is the answer not in the manual?
Questions and answers