Microscan QX Hawk User Manual page 375

Configuring Ethernet TCP/IP (cont.)
3. The Local Area Connection Status dialog will appear. To check the host computer's
connection settings, click Details on the Support tab.
To verify connection status:
4. A connected QX Hawk's default address information can be verified in ESP by clicking
the Search button in the Connection Wizard. Compare the imager's IP address to
the host's IP address to determine whether or not they are in the same subnet range
(this can be determined by your I.T. department if you are unsure).
QX Hawk Industrial Imager User's Manual
On the Support tab, click the Details
button to bring up a list of Network
Connection Details.
Appendices
A-77