Quick Start - Microscan QX Hawk User Manual

Contents
Step 1 Check Hardware................................................................................................................ 1-2
Step 2 Connect the System .......................................................................................................... 1-3
Step 3 Position the Imager............................................................................................................ 1-4
Step 4 Install ESP ......................................................................................................................... 1-5
Step 5 Select Model...................................................................................................................... 1-6
Step 6 Connect ............................................................................................................................. 1-7
Step 7 Locate Symbol.................................................................................................................. 1-9
Step 8 Calibrate .......................................................................................................................... 1-11
Step 9 Test Read Rate ............................................................................................................... 1-12
Step 10 Configure the Imager.................................................................................................... 1-13
Step 11 Save Changes .............................................................................................................. 1-14
This section explains how to set up and test the QX Hawk quickly using ESP (Easy Setup Program).
Detailed setup information for installing the imager into an application can be found in
subsequent sections.
QX Hawk Industrial Imager User's Manual

1 Quick Start

1-1