Table of Contents
Advertisement
The syntax for this command is:
set intelligent-multicast client-port-pruning time <seconds>
seconds
Example:
P330-N# set intelligent-multicast client-port-pruning-time
40
Done!
set intelligent-multicast group-filtering-delay time
User level: privileged, supervisor.
Use the set intelligent-multicast group-filtering delay time
command to set group filtering time delays. This is the time that the switch waits
between becoming aware of a Multicast group on a certain VLAN and starting to
filter traffic for this group.
The syntax for this command is:
set intelligent-multicast group-filtering-delay time <seconds>
seconds
Example:
P330-N# set intelligent-multicast group-filtering-delay time
40
Done!
set intelligent-multicast router-port-pruning time
User level: privileged, supervisor.
Use the set intelligent-multicast router-port-pruning time
command to set the aging time for router ports. This is a timer that ages out Router
port information if IGMP queries are not received within the configured time.
The syntax for this command is:
set intelligent-multicast router-port-pruning time <seconds>
seconds
Avaya P330-ML Reference Guide
Chapter 2
Client port pruning time in seconds
Group filtering time in seconds.
Router port pruning time in seconds.
Avaya P330-ML Layer 2 CLI Commands
67
Advertisement
Table of Contents
