Configuring Static Router Ports Using The Cli; Searching For Intelligent Multicast Sessions; Searching For Intelligent Multicast Sessions Using The Web Agent - Avaya Cajun P550R User Manual

Configuring
Static Router
Ports Using the
CLI

Searching for Intelligent Multicast Sessions

Searching for
Intelligent
Multicast
Sessions Using
the Web Agent
Cajun P550/P880/P882 Switch User Guide
2. Select Display/Configure Router Ports. The Router Port
Display/Configuration dialog box opens (Figure 16-2).
3. Enter a port number in the Port field.
4. Select All from the VLAN column to add this router port to all
VLANs
Or
Select a specific VLAN from the VLAN field pull-down menu.
*Note: When adding a router port to all VLANs, the router
port is added only to the VLANs bound to the
switch port. To bind multiple VLANs to a switch
port, refer to Chapter 4, Using VLANs, Spanning
Tree, Hunt Groups, and VTP Snooping, earlier in
this guide.
5. Click CREATE to save your changes.
To configure a static router port using the CLI, enter the following
command from Configure mode:
cajun(configure)# set intelligent-multicast
static-client-port <group-address>|<mac-address>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
You can search for intelligent multicast sessions using either the web
agent or the CLI.
To perform a session search using the web agent:
1. Select Session Search from the L2 > Intelligent Multicast
group on the web agent window. The Intelligent Multicast
Session Search dialog box opens (Figure 16-3).
Managing Intelligent Multicasting
16-9