Table of Contents
Advertisement
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
User level: supervisor
Use the set dot1x server-timeout command to set the server retransmission
timeout period for all ports. This is the maximum time that the port will wait for a
reply from the Authentication Server.
The syntax for this command is:
set dot1x server-timeout <Seconds>
Seconds
Example:
P330-1(super)# set dot1x server-timeout 90
set dot1x supp-timeout
User level: supervisor
Use the set dot1x supp-timeout command to set the maximum time that the
switch will wait for a reply from the Authenticated Station before the session is
terminated.
The syntax for this command is:
set dot1x supp-timeout <Seconds>
Seconds
Example:
P330-1(super)# set dot1x supp-timeout 90
set dot1x system-auth-control disable
User level: supervisor
Use the set dot1x system-auth-control disable command to globally
disable the PBNAC (802.1x) feature.
The syntax for this command is:
set dot1x system-auth-control disable
Example:
P330-1(super)# set dot1x system-auth-control disable
dot1x system-auth-control disabled
64
Number of seconds – 0 to 65535
Number of seconds – 0 to 65535
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
