Ip Broadcast-Address Command; Enable Vlan Commands Command - Avaya P333R-LB User Manual
Stackable load balancing switch
Hide thumbs
Also See for P333R-LB:
- Application manual (10 pages) ,
- Quick start installation manual (38 pages) ,
- Installation and configuration manual (218 pages)
Table of Contents
Advertisement
Chapter 6
Cajun Campus CLI - Layer 3
ip broadcast-address Command
Use the ip broadcast-address command to update the interface broadcast
address. The Broadcast address must be filled in with 0s or 1s.
The syntax for this command is:
ip broadcast-address <bc addr>
The broadcast IP address
bc addr
Example:
ip broadcast-address 192.168.255.255
enable vlan commands Command
Use the enable vlan command before configuring VLAN-oriented parameters,
when there is more than one interface on the same VLAN.
The syntax for this command is:
enable vlan commands
For more information on this command, refer to Multinetting (Multiple Subnets per
VLAN) on page 10.
Avaya P333R-LB User's Guide
169
Advertisement
Chapters
Table of Contents
