Chapter 7
Cajun Campus CLI - Layer 3
ip broadcast-address Command
Use the ip broadcast-address command to update the interface broadcast
address. The Broadcast address must be filled in with 0s or 1s.
The syntax for this command is:
ip broadcast-address <bc addr>
The broadcast IP address
bc addr
Example:
ip broadcast-address 192.168.255.255
enable vlan commands Command
Use the enable vlan command before configuring VLAN-oriented parameters,
when there is more than one interface on the same VLAN.
The syntax for this command is:
enable vlan commands
For more information on this command, refer to Multinetting (Multiple Subnets per
VLAN) on page 14.
Avaya P333R User's Guide
179