Show Trunk Command - Avaya P333R-LB User Manual

Chapter 5 Cajun Campus CLI – Layer 2

Show trunk Command

Use the show trunk command to display VLAN tagging information of the
ports, prot binding mode, and the port VLAN ID.
The syntax for this command is:
show trunk [<mod_num>[/<port_num>]]
Example:
P330-N> show trunk
Port
------ ----- ----------------------- -----------
1/1
1/2
1/3
1/4
1/5
P330-N> show trunk 1/5
Port
------ ----- -------------- ----------- ----------------------
1/5
Following are the show trunk command output fields:
Field
Port
Mode
Binding mode
Native VLAN
VLANs allowed
on trunk
68
Mode Binding mode
dot1q bound to configured vlans
dot1q bound to all vlans
off statically bound
off statically bound
off statically bound
Mode Binding mode
off statically bound
Description
The module and port number(s)
Tag status of the port (dot1q - dot1Q tagging mode,
off - clear mode).
Binding mode of the port
Number of the Port VLAN ID (the VLAN to which received
untagged traffic will be assigned).
Range of VLAN values allowed on the port.
Native vlan
1
1
1
1
1
Native vlan Vlans allowed on trunk
1 1
Avaya P333R-LB User's Guide