Table of Contents
Advertisement
show port auto-negotiation-flowcontrol-advertisement
Use the show port auto-negotiation-flowcontrol-advertisement
command to display the flowcontrol advertisement for a Gigabit port used to
perform auto-negotiation.
The syntax for this command is:
show port auto-negotiation-flowcontrol-advertisement
[<mod_num>[/<port_num>]]
mod_num
port num
Output Example:
P330-N> show port auto-negotiation-flowcontrol-advertisement
Port 1/1
Port 1/2
Port 1/3
etc.
show trunk
Use the show trunk command to display VLAN tagging information of the
ports, port binding mode, and the port VLAN ID.
The syntax for this command is:
show trunk [<mod_num>[/<port_num>]]
Output Example:
P330-N> show trunk
Port
------
1/1
1/2
1/3
1/4
1/5
Avaya P334T User's Guide
Number of the switch
Number of the port
advertises no flow control capabilities.
advertises no flow control capabilities.
advertises no flow control capabilities.
Mode
Binding mode
-----
-----------------------------
dot1q
bound to configured vlans
dot1q
bound to all vlans
off
statically bound
off
statically bound
off
statically bound
Chapter 6
CLI – Layer 2
Native vlan
-----------
1
1
1
1
1
63
Advertisement
Table of Contents
