Chapter 6
CLI – Layer 2
show port classification
Use the show port classification command to display a port's classification.
The syntax for this command is:
show port classification [module/[port]
module/port
Output Example:
P330-1(super)# show port classification
Port
------ ---------------------
1/1
1/2
1/3
1/4
1/5
1/6
1/7
etc...
show port redundancy
Use the show port redundancy command to display information about all
redundancy schemes defined for this stack.
The syntax for this command is:
show port redundancy
Output Example:
P330-N> show port redundancy
Redundancy Name
-----------------
uplink
52
The switch number/the port number
Port Classification
regular
regular
regular
regular
regular
regular
regular
Primary Port
--------------
1/7
Secondary Port
----------------
2/12
Avaya P332MF User's Guide
Status
--------
enable