Ln-Line Fuel Filter Replacement; Bowl Type Fuel Filter Cleaning And Inspection - TOHATSU NB-1000 Service Manual

SECTION 3

ln-Line Fuel Filter Replacement

In-line fuel filters cannot be serviced. Replace in-line
fuel filters once a year or with each tune-up. When
replacing an in-line fuel filter, note direction of fuel
flow as indicated by the arrow on the filter housing
for proper installation.
1. Loosen clips (1) on each side of the filter (2) and slide down
1
the hose.
2. Separate the fuel filter from the hoses and discard.
3. Replace with new fuel filter.
4. Attach hoses and secure clips.

Bowl Type Fuel Filter Cleaning and Inspection

1. lf necessary, use a wrench on the square at the bottom of
2
the sediment bowl (1) to loosen the bowl. Remove the bowl
from filter body (2).
2
2. Remove gasket (3) and screen (4).
3. Clean bowl and screen.
Clean the screen with a soft brush and solvent.
4. Inspect bowl for cracks and screen for damage. Replace gasket.
5. lnstall screen and bowl.
3-16
NOTE
NOTE
T1116
T1125
1-/ 2-Cylinder