TOHATSU NB-1000 Service Manual page 123

Model 5
2
Removal
The tiller steering handle for the 2.5/3.5 engine is for steering only.
For the 5 engine, the tiller arm steers and uses a single cable to
control the throttle. The 8/9.8 engine tiller arm steers and uses dual
cables to control the throttle. The 9.9/15/18/25/30 and 40 engine
tiller arms steer, control throttle through a pinion throttle linkage,
and can be set up for remote control.
1. Disconnect throttle cable(s) from carburetor(5, 8/9.8). Remove the
throttle shaft from advancer arm(9.9 - 40).
3 4
1 2
1-/ 2-Cylinder
2. Remove the tiller steering assembly
from lower unit.
MIDSECTION
T2206
5-5