TOHATSU NB-1000 Service Manual page 130

SECTION 5
10
25/30/40 Twist Handle and Linkage
Adjustment
Twist Handle and Linkage Disassembly
1. Loosen the M6 nylon nut (11) and remove the two handle
10
bolts (4).
10
2. Remove the handle assembly from the steering bracket.
10
3. Remove the Spring pin (12) from the universal pinion (1).
10
4. Remove the R-pin (13) from the cable pin (14).
10
5. Remove the throttle shaft supports (3).
6. Remove the throttle shaft B (2) and the universal pinion
10
(1), and relevant parts.
7. Remove the handle grip mounting screw (8) and pull out
10
the grip (9) from handle (6).
10
8. Pull out the throttle shaft A (10), and relevant parts.
5-12
T1652
1-/ 2-Cylinder