SECTION 5
1. Install swivel bracket and springs (if applicable) while installing
bracket nuts.
2. Install bracket distance piece (or plate) with bolts (or nuts).
3. Install the thrust rod.
4. Install the reverse lock lever and shaft.
5. Install the reverse lock link (if applicable, and cotter pin).
6. Install reverse lock arm and shaft.
7. Install reverse lock lever spring.
8. Install the reverse lock, cotter pin and rod.
9. Install reverse lock spring.
10. Fill all grease fittings. See Lubrication Chart in Section 2.
Installation
Installation is done in the reverse order of Removal.
5-34
1-/ 2-Cylinder