TOHATSU NB-1000 Service Manual page 150

SECTION 5
6
3. Remove the reverse lock lever spring (4).
4. Remove the reverse lock arm shafts (5) and remove the
6
reverse lock arm (6).
5. Remove the reverse lock link (7).
6
6. Remove the reverse lock lever shafts (8) and remove
6
the reverse lock lever (9).
6
7. Remove the thrust rod (10).
8. Remove the bracket distance piece nuts (11) and washer
6
(12) and pull out the bracket distance piece (13).
9. Remove the bracket nut (14), and separate the brackets.
6
5-32
1-/ 2-Cylinder