TOHATSU NB-1000 Service Manual page 93

SECTION 4
4. Remove ratchet e-ring (7), ratchet (5), ratchet guides
4 5
A and B (8) and (9), starter shaft bolt (14), starter shaft
(11) and finally the reel (3).
Take note of the direction in which the ratchet guides
A and B are mounted. Note position as it is essential
they be returned in the same orientation during
reassembly.
Remove the starter shaft bolt after loosening the
nut at the center of the starter shaft. Remove the
reel with the rope wound on it so that the internal
starter spring is not displaced.
4
4-12
NOTE
CAUTION
T1568
1-/ 2-Cylinder