Remove Brush Assembly; Install Brush Assembly; Assemble Starter Motor - TOHATSU NB-1000 Service Manual

SECTION 7

Remove Brush Assembly

17 18
1. Remove screws (1).
Remove brush assembly (1) carefully guiding the starter
19
motor terminal (2) through the bushing (3).

Install Brush Assembly

20
1. Apply genuine grease to bearing cup (1).
2. Install brush assembly (1). Make sure that the starter motor
21
terminal (2) is fully seated in the bushing (3).

Assemble Starter Motor

Bolts for models 25 / 30 / 40 may not be available as
separate parts. Check current Parts Catalog for
availability.
22
1. Clean commutator (1) with fine emery cloth.
7-60
T1526
NOTE
T1529
T1530
T1531
T1530
T1535
1-/ 2-Cylinder