TOHATSU NB-1000 Service Manual page 266

SECTION 7
7
Alternator Coils
Disconnect negative battery cable from battery
before removing alternator coils.
This procedure assumes alternator coils are available
as a separate replaceable component. Some engine
configurations might require replacement of entire
coil plate assembly. Check current Parts Catalog for
availability.
Removal
1. Remove the flywheel.
2. Disconnect terminals (3), (4), (5) and (6) for alternator coils
7
(1). Alternator coils are located on the coil plate assembly (2).
7-74
NOTE
T1552
1-/ 2-Cylinder