TOHATSU NB-1000 Service Manual page 170

SECTION 6
Removal
Ignition system must be disabled to prevent
accidental engine start-up during removal of the
gearcase.
1. Place engine in FORWARD gear so shift rod joint (1) is
1
accessible.
2. Use spring pin tooI A (3) (Part No. 345-72227-0) to remove
2
upperspring pin from shift rod joint. Discard the spring pin.
3. Remove gearcase mounting bolts (4) from both sides of
3
gearcase.
4
4. Separate gearcase from driveshaft housing.
6-18
T1361
WARNING
T1362
3
T1724
T1725
1-/ 2-Cylinder