STERN AND SWIVEL BRACKETS
The following procedures cover full disassembly of the
stern and swivel bracket components with the engine
mounted on an engine stand. To service only the stern
brackets, suspend engine with adequate hoist and
remove and install stern brackets as illustrated.
1
Models 2.5/3.5
2
Model 5
3
Models 8/9.8
4
Models 9.9/15/18 Type l
TYPE I has a metal rod type stem bracket bolt similar
to smaller engines.
TYPE ll has a pipe style stem bracket bolt similar to
larger engines.
5
Models 9.9/15/18 Type II
6
Models 25/30/40
Removal
1. Remove powerhead as described in Section 4.
2. Remove tiller steering handle if equipped, this section.
3. Remove lower engine cover, this section.
4. Remove gearcase as described in Section 6.
5. Remove driveshaft housing, this section.
1-/ 2-Cylinder
NOTE
NOTE
MIDSECTION
5-25