Gearcase Repair Procedures; Driveshaft Roller Bearings - TOHATSU NB-1000 Service Manual

SECTION 6

GEARCASE REPAIR PROCEDURES

DO NOT attempt gearcase repairs without proper
manufacturer special tools.
Use this section when service work requires disassembly or
replacement of the following gearcase components:

• Driveshaft roller bearings.

• Gearcase needle bearing.
• Propeller shaft housing needle bearing.
• Bevel gear A bearing outer race.
• Bevel gear A roller bearing.
Driveshaft Roller Bearings
1
If it is determined after complete inspection that
replacement of driveshaft roller bearing (1) is
necessary, all
removal and installation must be performed at a
qualified machine shop equipped with minimum 1
ton Press.
6-36
CAUTION
CAUTION
pressing operations
1
during
T1752
1-/ 2-Cylinder