TOHATSU NB-1000 Service Manual page 173

14
14
13. Remove bevel gear C (16) from the propeller shaft housing.
14. Insert screwdriver under one end of clutch pin snap
15
spring (17). Remove spring from groove by unwrapping it
from clutch. Discard the spring.
15. Place propeller shaft open end against bench surface
16
and push out clutch pin (18). Remove clutch spring (19) and
spring holder (20).
Wear safety glasses and DO NOT hold open end
of propeller shaft towards face or body when
removing clutch pin. Clutch spring and spring
holder come out with great force.
17
16. Pull clutch (21) off propeller shaft.
1-/ 2-Cylinder
WARNING
GEARCASE
T1730
T1379
T1378
T1380
6-21