TOHATSU NB-1000 Service Manual page 235

4
Removal
1. Remove the flywheel.
2. Disconnect terminals (4), (5), (6) and (7) for exciter coil (1)
4
connectors. Note that these terminals interconnect cable
from coil plate assembly (2) to cable from CD Unit (3):
3. Remove coil plate assembly cable clamp screws (1) and
5
cable clamp (2).
4. For models 9.9 / 15 / 18 / 25 / 30 / 40 ONLY: Carefully slit
6
coil plate assembly cable shield (3).
Make sure you don't cut electrical conductors inside
of coll plate assembly cable when you slit cable shield.
5. For models 9.9 / 15 / 18 / 25 / 30 / 40 ONLY: Cuttiewrap.
6. Remove exciter coil screws (4) and exciter coil from the
7
mounting bracket.
1-/ 2-Cylinder
NOTE
ELECTRICAL SYSTEM
T1785
T1993
T1994
T1995
7-43