TOHATSU NB-1000 Service Manual page 124

SECTION 5
Models 8/9.8
3
Disassembly
3 4
1 2
1 2 3 4
3. Fully disassemble all remaining components as illustrated.
Cleaning and Inspection
All worn, damaged, or missing parts must be replaced.
1. Wipe off aIl excess grease from components. Thoroughly clean
individual parts with mild solvent or isopropyl alcohol.
2. Dry all parts with low pressure compressed air.
5-6
1. Remove grip (2).
2. Disconnect throttle cables (3) from throttle
shaft (4). Remove the throttle shaft.
T2207
1-/ 2-Cylinder