TOHATSU NB-1000 Service Manual page 160

SECTION 6
8. InstalI Iower pump case dowel pins (7) if removed and o-
16
ring (8).
9. Apply gasket sealant to both sides of guide plate gasket
17
(9). Mount gasket and guide plate (10) on lower pump case.
10. Apply gasket sealant to guide plate side of upper pump
18
case gasket (11). Mount gasket on guide plate.
Installation
1. Apply a light coating of genuine grease or equivalent
19
friction surface marine grease to the lower pump case
driveshaft passage, oil seal lips (1), and o-ring (2). Apply an aerobic
gasket maker to flanged surface (3) to provide adequate seal
between lower pump case and gearcase.
2. Slide lower pump case down driveshaft and seat into
20
position on gearcase.
6-8
T1351 T1352 T1353
T1355
T1356
1-/ 2-Cylinder