Gearcase Needle Bearing - TOHATSU NB-1000 Service Manual

Gearcase Needle Bearing -

Models 9.9 / 15 / 18 / 25 / 30 / 40
Obtain needle roller bearing puller kit (Part No, 3C8-
72700-0).
2
Removal
1. Insert shaft (1) through needle bearing from water pump
2
side of gearcase.
2. Attach retainer (2) from propeller shaft side of gearcase to
2
shaft groove (3). Make sure retainer is fully seated in groove
with raised surface facing bearing:
3. Slide guide (4) onto shaft from water pump side of gearcase.
2
Make sure guide is seated in bearing.
4. lnstall plate/flange (5), washer (6), and nut (7) onto shaft.
5. Hold end of threaded shaft with wrench and tighten nut (7) until
bearing releases from housing.
1-/ 2-Cylinder
NOTE
GEARCASE
T1753
6-37