Bolts - TOHATSU NB-1000 Service Manual

SECTION 7
16
Removal
1. Disconnect CD Unit output lead (1) from ignition coil primary
16
cable (2).
17
2. Disconnect spark plug cap (1) from spark plug (2).
18
3. Remove bolts (1) and remove ignition coil.
Cleaning and Inspection
Clean mounting area with isopropyl alcohol.
Check for the following and repair or replace as required:
Remove spark plug(s) and inspect for fouling, damaged
19
electrodes, or damaged ceramic insulator.
CD Unit output connectors and leads for integrity, cut or cracked
insulation.
Installation
lnstall in reverse order of removal.
7-48
T1506
T1507 T1788
T1509
1-/ 2-Cylinder