Remove, Inspection And Installation Of Tiller Handle - TOHATSU MFS 4 Service Manual

5) Remove, inspection and installation
of tiller handle.
Loosen stud bolt 1 of tiller handle, and remove tiller
1.
handle from bottom cowl.
Check tiller handle spacer 2 and bushings 3 for wear
2.
and damage.
Loosen throttle grip screw 4 and remove the grip 5.
3.
Remove throttle shaft supporter 6 screw.
Check bushing 7 and throttle shaft dumper 8 for
damage.
Check throttle wire 9 for break, bend and crack, and
4.
replace if necessary.
4st 4/5/6 2011
3
2
7
8
5
4
1
9
7
6
7-15