Modifying An Existing Route; Parameters; Changing Waypoint Position - Furuno FCR-2107 Series Operator's Manual

10.4

Modifying an Existing Route

WPT Alerts
LAT
WPT
10.4.1

Parameters

Main parameters for the route planning are:
•
Latitude and longitude of the waypoint
•
Channel limits to the waypoint
•
Turning radius of the waypoint
10.4.2

Changing waypoint position

To change position of a waypoint you have following alternatives:
•
Enter latitude and longitude on the WPT page in the Plan Route dialog box.
•
Enter distance and direction for next waypoint.
•
Drag and drop waypoint using the left button.
LON Mode
WPT count
Delete WPT
Modifying an existing route
RAD/NM CH lim/m MIN/l\kn MAX/kn
10. Route Planning
10-11